Email updates

Keep up to date with the latest news and content from Virology Journal and BioMed Central.

Open Access Research

Comparisons of the M1 genome segments and encoded μ2 proteins of different reovirus isolates

Peng Yin12, Natalie D Keirstead13, Teresa J Broering45, Michelle M Arnold46, John SL Parker47, Max L Nibert46 and Kevin M Coombs1*

Author Affiliations

1 Department of Medical Microbiology and Infectious Diseases, University of Manitoba, Winnipeg, MB, R3E 0W3 Canada

2 Thrasos Therapeutics, Hopkinton, MA 01748 USA

3 Department of Pathobiology, Ontario Veterinary College, Guelph, ON, N1G 2W1 Canada

4 Department of Microbiology and Molecular Genetics, Harvard Medical School, Boston, MA, 02115 USA

5 Massachusetts Biologic Laboratories, Jamaica Plain, MA 02130-3597 USA

6 Virology Training Program, Division of Medical Sciences, Harvard University, Cambridge, MA 02138 USA

7 James A. Baker Institute for Animal Health, College of Veterinary Medicine, Cornell University, Ithaca, NY 14853 USA

For all author emails, please log on.

Virology Journal 2004, 1:6  doi:10.1186/1743-422X-1-6

The electronic version of this article is the complete one and can be found online at:

Received:29 July 2004
Accepted:23 September 2004
Published:23 September 2004

© 2004 Yin et al; licensee BioMed Central Ltd.

This is an open-access article distributed under the terms of the Creative Commons Attribution License (, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.



The reovirus M1 genome segment encodes the μ2 protein, a structurally minor component of the viral core, which has been identified as a transcriptase cofactor, nucleoside and RNA triphosphatase, and microtubule-binding protein. The μ2 protein is the most poorly understood of the reovirus structural proteins. Genome segment sequences have been reported for 9 of the 10 genome segments for the 3 prototypic reoviruses type 1 Lang (T1L), type 2 Jones (T2J), and type 3 Dearing (T3D), but the M1 genome segment sequences for only T1L and T3D have been previously reported. For this study, we determined the M1 nucleotide and deduced μ2 amino acid sequences for T2J, nine other reovirus field isolates, and various T3D plaque-isolated clones from different laboratories.


Determination of the T2J M1 sequence completes the analysis of all ten genome segments of that prototype. The T2J M1 sequence contained a 1 base pair deletion in the 3' non-translated region, compared to the T1L and T3D M1 sequences. The T2J M1 gene showed ~80% nucleotide homology, and the encoded μ2 protein showed ~71% amino acid identity, with the T1L and T3D M1 and μ2 sequences, respectively, making the T2J M1 gene and μ2 proteins amongst the most divergent of all reovirus genes and proteins. Comparisons of these newly determined M1 and μ2 sequences with newly determined M1 and μ2 sequences from nine additional field isolates and a variety of laboratory T3D clones identified conserved features and/or regions that provide clues about μ2 structure and function.


The findings suggest a model for the domain organization of μ2 and provide further evidence for a role of μ2 in viral RNA synthesis. The new sequences were also used to explore the basis for M1/μ2-determined differences in the morphology of viral factories in infected cells. The findings confirm the key role of Ser/Pro208 as a prevalent determinant of differences in factory morphology among reovirus isolates and trace the divergence of this residue and its associated phenotype among the different laboratory-specific clones of type 3 Dearing.


RNA viruses represent the most significant and diverse group of infectious agents for eukaryotic organisms on earth [1,2]. Virtually every RNA virus, except retroviruses, must use an RNA-dependent RNA polymerase (RdRp) to copy its RNA genome into progeny RNA, an essential step in viral replication and assembly. The virally encoded RdRp is not found in uninfected eukaryotic cells and therefore represents an attractive target for chemotherapeutic strategies to combat RNA viruses. A better understanding of the structure/function relationships of RNA-virus RdRps has been gained from recent determinations of X-ray crystal structures for several of these proteins, including the RdRps of poliovirus, hepatitis C virus, rabbit calicivirus, and mammalian orthoreovirus [3-6]. However, the diverse and complex functions and regulation of these enzymes, including their interactions with other viral proteins and cis-acting signals in the viral RNAs, determine that we have hardly scratched the surface for understanding most of them.

The nonfusogenic mammalian orthoreoviruses (reoviruses) are prototype members of the family Reoviridae, which includes segmented double-stranded RNA (dsRNA) viruses of both medical (rotavirus) and economic (orbivirus) importance (reviewed in [7-9]). Reoviruses have nonenveloped, double-shelled particles composed of eight different structural proteins encasing the ten dsRNA genome segments. Reovirus isolates (or "strains") can be grouped into three serotypes, represented by three commonly studied prototype isolates: type 1 Lang (T1L), type 2 Jones (T2J), and type 3 Dearing (T3D). Sequences have been reported for all ten genome segments of T1L and T3D, as well as for nine of the ten segments of T2J (all but the M1 segment) (e.g., see [10,11]). Each of these segments encodes either one or two proteins on one of its strands, the plus strand. After cell entry, transcriptase complexes within the infecting reovirus particles synthesize and release full-length, capped plus-strand copies of each genome segment. These plus-strand RNAs are used as templates for translation by the host machinery as well as for minus-strand synthesis by the viral replicase complexes. The latter process produces the new dsRNA genome segments for packaging into progeny particles. The particle locations and functions of most of the reovirus proteins have been determined by a combination of genetic, biochemical, and biophysical techniques over the past 50 years (reviewed in [8]).

Previous studies have identified the reovirus λ3 protein, encoded by the L1 genome segment, as the viral RdRp [6,12-14]. Protein λ3 is a minor component of the inner capsid, present in only 10–12 copies per particle [15]. It has been proposed to bind to the interior side of the inner capsid, near the icosahedral fivefold axes, and recent work has precisely localized it there [16,17]. In solution, purified λ3 mediates a poly(C)-dependent poly(G)-polymerase activity, but it has not been shown to use virus-specific dsRNA or plus-strand RNA as template for plus- or minus-strand RNA synthesis, respectively [14]. This lack of activity with virus-specific templates suggests that viral or cellular cofactors may be required to make λ3 fully functional. Within the viral particle, where only viral proteins are known to reside, these cofactors are presumably viral in origin. The crystal structure of λ3 has provided substantial new information about the organization of its sequences and has suggested several new hypotheses about its functions in viral RNA synthesis and the possible roles of cofactors in these functions [6]. Notably, crystallized λ3 uses short viral and nonviral oligonucleotides as templates for RNA synthesis to yield short dsRNA products [6].

The reovirus μ2 protein has been proposed as a transcriptase cofactor, but it remains the most functionally and structurally enigmatic of the eight proteins found in virions. Like λ3, μ2 is a minor component of the inner capsid, present in only 20–24 copies per particle [15]. It is thought to associate with λ3 in the particle interior, in close juxtaposition to the icosahedral fivefold axes, but has not been precisely localized there [16,17]. A recent study has shown that purified μ2 and λ3 can interact in vitro [18]. The M1 genome segment that encodes μ2 is genetically associated with viral strain differences in the in vitro transcriptase and nucleoside triphosphatase (NTPase) activities of viral particles [19,20]. Recent work with purified μ2 has shown that it can indeed function in vitro as both an NTPase and an RNA 5'-triphosphatase [18]. The μ2 protein has also been shown to bind RNA and to be involved in formation of viral inclusions, also called "factories", through microtubule binding in infected cells [18,21-23]. Nevertheless, its precise function(s) in the reovirus replication cycle remain unclear. Other studies have indicated that the μ2-encoding M1 segment genetically determines the severity of cytopathic effect in mouse L929 cells, the frequency of myocarditis in infected mice, the levels of viral growth in cardiac myocytes and endothelial cells, the degree of organ-specific virulence in severe combined immunodeficiency mice, and the level of interferon induction in cardiac myocytes [24-29]. The complete sequence of the M1 segment has been reported for both T1L and T3D [23,30,31]. However, computer-based comparisons of the M1 and μ2 sequences to others in GenBank have previously failed to show significant homology to other proteins, so that no clear indications of μ2 function have come from that approach. Nevertheless, small regions of sequence similarity to NTP-binding motifs have been identified near the middle of μ2, and recent work has indicated that mutations in one of these regions indeed abrogates the triphosphatase activities of μ2 [18,20].

For this study, we performed nucleotide-sequence determinations of the M1 genome segments of reovirus T2J, nine other reovirus field isolates, and reovirus T3D clones obtained from several different laboratories. The determination of the T2J M1 sequence completes the sequence determination of all ten genome segments of that prototype strain. We reasoned that comparisons of additional M1 and μ2 sequences may reveal conserved features and/or regions that provide clues about μ2 structure and function. The findings provide further evidence for a role of μ2 in viral RNA synthesis. We also took advantage of the newly available sequences to explore the basis for M1/μ2-determined strain differences in the morphology of viral factories in reovirus-infected cells.

Results and Discussion

M1 nucleotide and μ2 amino acid sequences of reovirus T2J and nine other field isolates

We determined the nucleotide sequence of the M1 genome segment of reovirus T2J to complete the sequencing of that isolate's genome. T2J M1 was found to be 2303 base pairs in length (GenBank accession no. AF124519) (Table 1). This is one shorter than the M1 segments of reoviruses T1L and T3D [23,30,31], due to a single base-pair deletion in T2J corresponding to position 2272 in the 3' nontranslated region of the T1L and T3D plus strands (Fig. 1, Table 1). Like those of T1L and T3D, the T2J-M1 plus strand contains a single long open reading frame, encoding a μ2 protein of 736 amino acids (Fig. 2, Table 1), having the same start and stop codons (Fig. 1), and having a 5' nontranslated region that is only 13 nucleotides in length (Table 1). Because of the single-base deletion described above, the 3' nontranslated region of the T2J M1 plus strand is only 82 nucleotides in length, compared to 83 for T1L and T3D (Table 1). Regardless, M1 has the longest 3' nontranslated region of any of the genome segments of these viruses, the next longest being 73 nucleotides in S3 (reviewed in [32]).

Table 1. Features of M1 genome segments and μ2 proteins from different reovirus isolates

thumbnailFigure 1. Sequences near the 5' (A) and 3' (B) ends of the M1 plus strands of 14 reovirus isolates. The start and stop codons are indicated by bold and underline, respectively. The one-base deletion in the 3' noncoding region of the T2J sequence is indicated by a triangle. Positions at which at least one sequence differs from the others are indicated by dots. GenBank accession numbers for corresponding sequences are indicated between the clones' names and 5' sequences in "A". Clones are: T1L (type 1, Lang), T1C11 (type 1, clone 11), T1C29 (type 1, clone 29), T1N84 (type 1, Netherlands 1984), T2J (type 2, Jones), T2N84 (type 2, Netherlands 1984), T2S59 (type 2, simian virus 59), T3D (type 3, Dearing), T3C12 (type 3, clone 12), T3C18 (type 3, clone 18), T3C44 (type 3, clone 44), and T3N83 (type 3, Netherlands 1983). T1L clones were obtained from Dr. E.G. Brown (Brown) or our laboratories (Coombs/Nibert). T3D clones were obtained from Drs. W.K. Joklik, L.W. Cashdollar (Joklik/Cashdollar) and our laboratories (Coombs/Nibert).

thumbnailFigure 2. Alignment of the deduced μ2 amino acid sequences of T1L, T2J, T3D, and various field isolates. The single-letter amino acid code is used, and only the T1L μ2 sequence from the Brown laboratory is shown in its entirety. For other isolates, only those amino acids that differ from this T1L sequence are shown. Clones arranged in same order as in Fig. 1; the second T1L μ2 sequence is from the Nibert and Coombs laboratories, the first T3D μ2 sequence is from the Joklik and Cashdollar laboratories, and the second T3D μ2 sequence is from the Nibert and Coombs laboratories. Amino acid positions are numbered above the sequences. Some symbols represent various nonconservative changes among the isolates: *, change involving a charged residue; § change involving an aromatic residue; †, change involving a proline residue; ‡, change involving a cysteine residue. Residue 208, which has been previously shown to affect microtubule association by μ2, is indicated by a filled diamond. Residues 410–420 and 446–449, which have been previously identified as NTP-binding motifs are indicated by filled circles. Consecutive runs of wholly conserved residues ≥ 15 amino acids in length are indicated by the lines numbered 1 to 8.

To gain further insights into μ2 structure/function relationships, we determined the M1 nucleotide sequences of nine other reovirus field isolates [33,34]. The M1 segments of each of these viruses were found to be 2304 base pairs in length (GenBank accession nos. AY428870 to AY428877 and AY551083), the same as T1L and T3D M1 (Fig. 1). Like those of T1L, T2J, and T3D, the M1 plus strand from each of the field isolates contains a single long open reading frame, again encoding a μ2 protein of 736 amino acids (Fig. 2) and having the same start and stop codons (Fig. 1). Their 5' and 3' nontranslated regions are therefore the same lengths as those of T1L and T3D M1 (Table 1). As part of this study, we also determined the M1 nucleotide sequences of the reovirus T1L and T3D clones routinely used in the Coombs laboratory. We found these sequences to be identical to those recently reported for the respective Nibert laboratory clones [23].

Further comparisons of the M1 nucleotide sequences

The T2J M1 genome segment shares 71–72% homology with those of both T1L and T3D (Table 2). This makes T2J M1 the most divergent of all nonfusogenic mammalian orthoreovirus genome segments examined to date, with the exception of the S1 segment, which encodes the attachment protein σ1 and which shows less than 60% nucleotide sequence homology between serotypes [35,36]; reviewed in [11]. In contrast, the homology between T1L and T3D M1 is ~98%, among the highest values seen to date between reovirus genome segments from distinct field isolates [11,31,34,37-39].

Table 2. Pairwise comparisons of M1 genome segment and μ2 protein sequences from different reovirus isolates

The M1 genome segments of the nine other reovirus isolates examined in this study are much more closely related to those of T1L and T3D than to that of T2J (Table 2), as also clearly indicated by phylogenetic analyses (Fig. 3 and data not shown). Such greater divergence of the gene sequences of T2J has been observed to date with other segments examined from multiple reovirus field isolates [11,34,37-39]. Type 2 simian virus 59 (T2S59) has the next most broadly divergent M1 sequence, but it is no more similar to the M1 sequence of T2J than it is to that of the other isolates (Table 2, Fig. 3). In sum, the results of this study provided little or no evidence for divergence of the M1 sequences along the lines of reovirus serotype (Fig. 3), consistent with independent reassortment and evolution of the M1 and S1 segments in nature. Upon considering the sources of these isolates [34], the results similarly provided little or no evidence for divergence of the M1 sequences along the lines of host, geographic locale, or date of isolation (Fig. 3). These findings are consistent with ongoing exchange of M1 segments among reovirus strains cocirculating in different hosts and locales. Similar conclusions have been indicated by previous studies of other genome segments from multiple reovirus field isolates [11,34,37-39]. The M1 nucleotide sequence of type 3 clone 12 (T3C12) is almost identical to that of the T3D clone in use in the Coombs and Nibert laboratories, with only a single silent change (U→C) at plus-strand position 1532 (i.e., 99.9+% homology). However, several of the T3C12 genome segments show distinguishable mobilities in polyacrylamide gels (data not shown), confirming that T3C12 is indeed a distinct isolate.

thumbnailFigure 3. Most parsimonious phylogenetic tree based on the M1 nucleotide sequences of the different reoviruses. Sequences for T1L and T3D clones from different laboratories are shown (laboratory source(s) in parentheses). Horizontal lines are proportional in length to nucleotide substitutions.

Further comparisons of the μ2 protein sequences

The T2J μ2 protein shares 80–81% homology with those of both T1L and T3D (Table 2, Fig. 2). Consistent with the M1 nucleotide sequence results, this makes T2J μ2 the most divergent of all nonfusogenic mammalian orthoreovirus proteins examined to date, with the exception of the S1-encoded σ1 and σ1s proteins, which show less than 55% amino acid sequence homology between serotypes [35,36]; reviewed in [11]. In contrast, the homology between T1L and T3D μ2 approaches 99%, among the highest values seen to date between reovirus genome segments from distinct isolates [11,31,34,37-39]. Also consistent with the M1 nucleotide sequence results, the μ2 proteins of the nine other reovirus isolates examined in this study are much more closely related to those of T1L and T3D than to that of T2J (Table 2, Fig. 3), affirming the divergent status of the T2J μ2 protein. The μ2 protein sequence of T3C12 is identical to that of the T3D clone in use in the Coombs and Nibert laboratories. In addition, the μ2 protein sequence of T1C29 is identical to that of T3C44. These are the first times that reovirus proteins from distinct isolates have been found to share identical amino acid sequences [11,32,34,37-39], reflecting the high degree of μ2 conservation.

The encoded μ2 proteins of the twelve reovirus isolates are all calculated to have molecular masses between 83.2 and 84.0 kDa, and isoelectric points between 6.89 and 7.44 pH units (Table 1). This range of isoelectric points is the largest yet seen among reovirus proteins other than σ1s [11], but is largely attributable to the divergent value of T2J μ2 (others range only from 6.89 to 7.10). The substantially higher isoelectric point of T2J μ2 is explained by it containing a larger number of basic residues (excess arginine) than do the other isolates (Table 1).

Comparisons of the twelve μ2 sequences showed eight highly conserved regions, each containing ≥ 15 consecutive residues that are identical in all of the isolates (Fig. 2). The highly conserved regions are clustered in two larger areas of μ2, spanning approximately amino acids 1–250 and amino acids 400–610. Conserved region 5 in the 400–610 area encompasses the more amino-terminal of the two NTP-binding motifs in μ2 (Fig. 2) [18,20]. The other NTP-binding motif is also wholly conserved, but within a smaller consecutive run of conserved residues. The region between the two motifs is notably variable (Fig. 2). Conserved region 5 also contains the less conservative of the two amino acid substitutions in T1L-derived temperature-sensitive (ts) mutant tsH11.2 (Pro414→His) [40]. The pattern of conserved and variable areas of μ2 was also seen by plotting scores for sequence identity in running windows over the protein length (e.g., [32]). In addition to the conserved regions described above, areas of greater than average variation are evident in this plot, spanning approximately amino acids 250–400 and 610–736 (the carboxyl terminus) (Fig. 4). The 250–400 area is notable for regularly oscillating between conserved and variable regions (Fig. 4). The two large areas of greater-than-average sequence conservation, spanning approximately amino acids 1–250 and 400–610 (Fig. 4), are likely to be involved in the protein's primary function(s). The more variable, 250–400 area between the two conserved ones might represent a hinge or linker of mostly structural importance.

thumbnailFigure 4. Window-averaged scores for sequence identity among the T1L, T2J, and T3D μ2 proteins. Identity scores averaged over running windows of 21 amino acids and centered at consecutive amino acid positions are shown. The global identity score for the three sequences is indicated by the dashed line. Two extended areas of greater-than-average sequence variation are marked with lines below the plot. Two extended areas of greater-than-average sequence conservation are marked with lines above the plot. Eight regions of ≥ 15 consecutive residues of identity among all twelve μ2 sequences from Fig. 2, as discussed in the text, are numbered above the plot. The Ser/Pro208 determinant of microtubule binding is marked with a filled diamond. The two putative NTP-binding motifs are marked with filled circles.

As indicated earlier, μ2 is one of the most poorly understood reovirus proteins, from both a functional and a structural point of view. For example, atomic structures are available for seven of the eight reovirus structural proteins, with μ2 being the missing one. Thus, in an effort to refine the model for μ2 structure/function relationships based on regional differences, we obtained predictions for secondary structures, hydropathy, and surface probability. PHD PredictProtein algorithms suggest that μ2 can be divided into four approximate regions characterized by different patterns of predicted secondary structures (Fig. 5C). An amino-terminal region spans to residue 157, a "variable" region spans residues 157 to 450, a "helix-rich" region spans residues 450 to 606, and a carboxyl-terminal region spans the sequences after residue 606. The amino-terminal region contains six predicted α-helices and three predicted β-strands, and is highly conserved across all twelve μ2 sequences. The "variable" region is the most structurally complex and contains numerous interspersed α-helices and β-strands. The "helix-rich" region contains seven α-helices and is highly conserved across all twelve μ2 sequences. The carboxyl-terminal region varies across all three serotypes. Overall, the μ2 protein is predicted to be 48% α-helical and 14% β-sheet in composition, making it an "α-β " protein according to the CATH designation [41]. Interestingly, most tyrosine protein kinases with SH2 domains are also "α-β " proteins by this designation. The T1L and T3D μ2 hydropathy profiles were identical to each other. Both show numerous regions of similarity to the hydropathy profile of the T2J μ2. However, there also are several distinct differences between the T1L and T2J profiles (Fig. 5). Alterations in amino acid charge at residues 32, 430 to 432, and 673 in the T2J sequence account for the major differences in hydrophobicity between T2J and the other serotypes. In addition, the carboxyl-terminal 66 residues show multiple differences in hydropathy. The surface probability profiles of each of the three serotype's μ2 proteins are identical (Fig. 5) and show numerous regions that are highly predicted to be exposed at the surface of the protein as well as regions predicted to be buried.

thumbnailFigure 5. Secondary structure predictions of μ2 protein. (A) Hydropathicity index predictions of T2J (- - -) and T1L (-----) μ2 proteins, superimposed to accentuate similarities and differences. Hydropathy values were determined by the Kyte-Doolittle method [72], using DNA Strider 1.2, a window length of 11, and a stringency of 7. (B) Surface probability predictions of the T2J μ2 protein, determined as per Emini et al. [73], using DNASTAR. The predicted surface probability profiles of T1L and T3D (not shown) were identical to T2J. (C) Locations of α-helices and β-sheets were determined by the PHD PredictProtein algorithms [74], and results were graphically rendered with Microsoft PowerPoint software., α-helix;., β-sheet;—, turn. Differences in fill pattern correspond to arbitrary division of protein into four regions; N, amino terminal; V, variable; H, helix-rich; C, carboxyl terminal. The locations of variable regions are indicated by the thick lines under the domain representation.

The MOTIF and FingerPRINTScan programs were used to compare the highly conserved regions of μ2 with other sequences in protein data banks (ProSite, Blocks, and ProDomain). The results revealed that several of the conserved regions in μ2 share limited similarities with members of the DNA polymerase A family and with the SH2 domain of tyrosine kinases. The sequence YEAgDV in μ2, located in conserved region 2 (Fig. 2), is similar to the "YAD" motif of DNA polymerase A from a number of different bacteria (e.g., YEADDV in Deinococcus radiodurans). The YAD motif is located in the exonuclease region of DNA polymerase A, a region which also functions as an NTPase and enhances the rate of DNA polymerization [42]. The SH2 domain of tyrosine kinases was the highest score hit for the conserved regions of μ2 with FingerPRINTScan. Four of the five motifs in the 100 amino acid SH2 domain matched the μ2 sequence. The SH2 domain mediates protein-protein interactions through its capacity to bind phosphotyrosine [43]. The protein motifs found by focusing on the conserved regions of μ2 provide supportive evidence that this protein is involved in nucleotide binding and metabolism. However, the described similarities did not match with greater than 90% certainty and no other significant homologies were detected. The inability to identify higher-scoring GenBank similarities, first noted when sequences of the T3D and T1L M1 genes were reported [30,31] attests to the uniqueness of this minor core protein.

Biochemical confirmations

In an effort to provide biochemical confirmation of the predicted variation in the different isolates' μ2 proteins, we analyzed the T1L, T2J, and T3D proteins by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and immunoblotting. Despite the slightly larger molecular mass calculated from its sequence (Table 1), T2J μ2 displayed a slightly smaller relative molecular weight on gels than T1L and T3D μ2 (Fig. 6A). This aberrant mobility may reflect the higher isoelectric point of T2J μ2 (Table 1). Polyclonal anti-μ2 antibodies that had been raised against purified T1L μ2 [44] reacted strongly with both T1L and T3D μ2, but only weakly with T2J μ2 (Fig. 6B), despite equal band loading as demonstrated by Ponceau S staining. These antibody cross-reactivities correlated well with the predicted protein homologies (Table 2).

thumbnailFigure 6. SDS-PAGE and immunoblot analyses of virion and core particles. Proteins from gradient-purified T1L (1), T2J (2), and T3D (3) particles were resolved in 5–15% SDS-polyacrylamide gels as detailed in Materials and methods. Gels were then fixed and stained with Coomassie Brilliant Blue R-250 and silver (A). Alternatively, proteins from the gels were transferred to nitrocellulose, probed with anti-μ2 antiserum (polyclonal antibodies raised against T1L μ2, kindly provided by E. G. Brown), and detected by chemiluminescence (B). Virion proteins are indicated to the left of panel A, except for μ2, which is indicated between the panels.

Factory morphologies among reovirus field isolates

We took advantage of the new M1/μ2 sequences to extend analysis of the role of μ2 in determining differences in viral factory morphology among reovirus isolates [23]. Sequence variation at μ2 residue Pro/Ser208 was previously indicated to determine the different morphologies of T1L and T3D factories: Pro208 is associated with microtubule-anchored filamentous factories, as in T1L and the Cashdollar laboratory clone of T3D, whereas Ser208 is associated with globular factories, as in the Nibert laboratory clone of T3D [23]. For the previous study we had already examined the factories of T2J and some of the nine other isolates used for M1 sequencing above. We nonetheless newly examined the factories of all ten isolates in the present study, using the same stocks used for sequencing. T3C12 was the only one of these isolates that formed globular factories; the remainder, including T2J, formed filamentous factories (Fig. 7, Table 4). This finding is consistent with the fact that T3C12 is the only one of these isolates that has a serine at μ2 residue 208, like T3D from the Nibert laboratory; the remainder, like T1L and T3D from the Cashdollar laboratory, have a proline there (Fig. 2, Table 4) [23]. Thus, although the results identify no additional μ2 residues that may influence factory morphology, they are consistent with the identification of Pro/Ser208 as a prevalent determinant of differences in this phenotype among reovirus isolates.

thumbnailFigure 7. Viral factory morphology as demonstrated by the distribution of μNS in cells infected with various reovirus isolates. CV-1 cells were infected at 5 PFU/cell with the isolate indicated above each panel, fixed at 18 h p.i., and immunostained with μNS-specific rabbit IgG conjugated to Alexa 594. Size bars, 10 μm.

Table 4. Properties of different reovirus isolates

Factory morphologies and M1/μ2 sequences of other T3D and T3D-derived clones

T3D clones from the Nibert and Cashdollar laboratories have been shown to exhibit different factory morphologies based on differences in the microtubule-binding capacities of their μ2 proteins and the presence of either serine or proline at μ2 residue 208 [23]. We took the opportunity in this study to examine additional T3D clones. The clones from some laboratories formed globular factories in infected cells whereas those from other laboratories or the American Type Culture Collection formed filamentous factories (Fig. 8, Table 5). T3D-derived ts mutants tsC447, tsE320, and tsG453 [45] formed filamentous factories (Fig. 8, Table 5). Other ts mutants were not examined; however, [46] have shown evidence that tsF556 [45] forms filamentous factories as well.

thumbnailFigure 8. Viral factory morphology as demonstrated by the distribution of μNS in cells infected with T3D clones obtained from different laboratories or with T3D-derived ts clones. Laboratory sources are indicated in parentheses. CV-1 cells were infected at 5 PFU/cell with the clone indicated above each panel, fixed at 18 h p.i., and immunostained with μNS-specific rabbit IgG conjugated to Alexa 488. Size bars, 10 μm.

Table 5. Properties of different T3D and T3D-derived clones

We additionally determined the M1 sequences of the wild-type and ts T3D clones newly tested for factory morphology. All clones with globular factories have a serine at μ2 position 208 whereas all those with filamentous factories have a proline there (Table 5). These findings provide further evidence for the influence of residue 208 on this phenotypic difference.

All wild-type T3D clones with globular factories were recently derived from a Fields laboratory parent whereas all wild-type or ts T3D clones with filamentous factories were derived from parents in other laboratories. (Although extensively characterized by both Fields (e.g., [47,48]) and Joklik (e.g., [49,50]), the original T3D-derived ts mutants in groups A through G were generated in the Joklik laboratory [45]). This correlation suggests that formation of filamentous factories is the ancestral phenotype of reovirus T3D and that the Ser208 mutation in T3D μ2 was established later, in the Fields laboratory. As we noted in a previous study [23], several other laboratories reported evidence for filamentous T3D factories in the 1960's (e.g., [51,52]), following its isolation in 1955 [53]. Since microtubules were noted to be commonly associated with T3D factories in Fields laboratory publications from as late as 1973 [54], but not in one from 1979 [55], the μ2 Ser208 mutation was probably established in, or introduced into, that laboratory during the middle 1970's. Investigators should be alert to these different lineages of T3D and their derivatives for genetic studies. For example, reassortant 3HA1 [56] contains a T3D M1 genome segment derived from clone tsC447, and its factory phenotype is filamentous (data not shown).

Additional genome-wide comparisons of T1L, T2J, and T3D

Several types of genome-wide comparisons of T1L, T2J, and T3D have been reported previously [11]. For this study we examined the positions and types of nucleotide mismatches in these prototype isolates in order to gain a more comprehensive view of the evolutionary divergence of their protein-coding sequences. Most mismatches between T2J and either T1L or T3D segments, ~68%, are in the third codon base position, while ~21% are in the first position and ~11% are in the second position. Each of these mismatch percentages was converted to an evolutionary divergence value by multiplying mismatch percentage by 1.33 [31] (Table 3). These values have been used to argue that the homologous T1L and T3D genome segments diverged from common ancestors at different times in the past, with the M1 and L3 segments having diverged most recently and the M2, S1, S2, and S3 segments having diverged longer ago [31]. The consistently high values for divergence at third codon base positions among pairings with T2J genome segments (Table 3) indicate that all ten T2J segments diverged from common ancestors substantially before their respective T1L and T3D homologs. Relative numbers of synonymous and nonsynonymous nucleotide changes identified in pairwise comparisons of the coding sequences of these isolates (Table 3) support the same conclusion.

Table 3. Pairwise comparisons of variation at different codon positions in reovirus genome segments

The types of amino acid substitutions within each of the prototype isolates' proteins were also examined. Pairwise analyses showed that most substitutions in most proteins were conservative (Table 3). Nonconservative substitutions were relatively rare in most proteins' pair-wise comparisons. For example, comparison of the T1L and T3D μ2 proteins showed none (0.0%) of the 10 amino acid substitutions were nonconservative, and most T1L:T3D comparisons gave low nonconservative substitution values ranging from 0.1–0.5% of total amino acid residues within the respective proteins. However, some genes, most notably M1, M3, and S3, demonstrated higher nonconservative variation, with values approaching 3.5% of total amino acid residues. Most of these higher nonconservative substitution values were observed when T2J proteins were compared to either T1L or T3D proteins. In addition, in many proteins, the majority of nonconservative substitutions were located within the amino-terminal portions (first ~20%) of the respective proteins (data not shown).

The frequencies with which different redundant codons are used to encode certain mammalian amino acids are non-random (reviewed in [57]). This phenomenon is mirrored by different abundances of the complementary tRNA molecules in mammalian cells. For example, CG pairs are underrepresented in mammalian genomes and common in their "rare" codons (see Table 6). A recent study revealed that many RNA viruses of humans display mild deviations from host codon-usage frequencies and that these deviations are more prominent among viruses with segmented genomes [57]. However, reoviruses were not included in that study. By examining reovirus isolates T1L, T2J, and T3D, for which whole-genome sequences are now available, we found that codons that qualify as rare in mammals are not rare in reovirus (Table 6). Moreover, the few codons that qualify as rare in reovirus (ACC, AGC, CCC, CGG, CUC, and GCC; data not shown) are common in mammals. The basis and significance of these deviations remain unknown, but could have impacts on the rates of translation of reovirus proteins. It is perhaps notable in this regard that the four most highly expressed reovirus proteins (μ1, σ3, μNS, and σNS) have the lowest average frequencies of codons that are rare in mammals (Table 6). Thus, incorporation of rare codons into reovirus coding sequences could be a mechanism of dampening the expression of certain viral proteins.

Table 6. Codon-usage frequencies in reovirus for eight codons that are rare in mammals


Cells and viruses

Reoviruses T1L, T2J, T3D, and T3C12 were Coombs and/or Nibert laboratory stocks. Other reovirus isolates were provided by Dr. T. S. Dermody (Vanderbilt University). Virus clones were amplified to the second passage in murine L929 cell monolayers in Joklik's modified minimal essential medium (Gibco) supplemented to contain 2.5% fetal calf serum (Intergen), 2.5% neonatal bovine serum (Biocell), 2 mM glutamine, 100 U/ml penicillin, 100 μg/ml streptomycin, and 1 μg/ml amphotericin B, and large amounts of virus were grown in spinner culture, extracted with Freon (DuPont) or Vertrel-XF (DuPont), and purified in CsCl gradients, all as previously described [19,58].

Sequencing the M1 genome segments

All oligonucleotide primers were obtained from Gibco/BRL. Genomic dsRNA was extracted from gradient-purified virions with phenol/chloroform [59]. Strain identity was confirmed by resolving aliquots of each in 10% SDS-PAGE gels and comparing dsRNA band mobilities [60]. Oligonucleotide primers corresponding to either the 5' end of the plus strand or the 5' end of the minus strand were as previously described [40]. Additional oligonucleotides for sequencing were designed and obtained as needed. cDNA copies of the M1 genes of each virus were constructed by using the 5' oligonucleotide primers and reverse transcriptase (Gibco/BRL). The cDNAs were amplified by the polymerase chain reaction [61] and resolved in 0.7% agarose gels [59]. The bands corresponding to the 2.3-kb gene were then excised, purified, and eluted with Qiagen columns, using the manufacterer's instructions. Sequences of the respective cDNAs were determined in both directions by dideoxynucleotide cycle sequencing [62-64], using fluorescent dideoxynucleotides.

Sequences at the termini of each M1 segment were determined by one or both of two methods. For some isolates, sequences near the ends of the segment were determined by modified procedures for rapid amplification of cDNA ends (RACE) as previously described [32,65]. In addition, the sequences at the ends of all M1 segments were determined in both directions by a modification of the 3'-ligation method described by Lambden et al. [66]. Briefly, viral genes from gradient-purified virions were resolved in a 1% agarose gel, and the M segments were excised and eluted with Qiagen columns as described above. Oligonucleotide 3'L1 (5'-CCCCAACCCACTTTTTCCATTACGCCCCTTTCCCCC-3'; phosphorylated at the 5' end and blocked with a biotin group at the 3' end) was ligated to the 3' ends of the M segments according to the manufacterer's directions (Boehringer Mannheim) at 37°C overnight. The ligated genes were repurified by agarose gel and Qiagen columns to remove unincorporated 3'L1 oligonucleotide and precipitated overnight with ice-cold ethanol. The precipitated genes were dissolved in 4 μl of 90% dimethyl sulfoxide. cDNA copies of the ligated M1 genes were constructed by using oligonucleotide 3'L2 (5'-GGGGGAAAGGGGCGTAATGGAAAAAGTGGGTTGGGG-3') and gene-specific internal oligonucleotide primers designed to generate a product of 0.5 to 1.2 kb in length. These constructs were amplified by PCR, purified in 1.5% agarose gels, excised, and eluted as described above. Sequences of these cDNAs were determined with gene-specific internal oligonucleotides and with oligonucleotide 3'L3 (5'-GGGGGAAAGGGGCGTAAT-3') by dideoxy-fluorescence methods.

Sequence analyses

DNA sequences were analyzed with DNASTAR, DNA Strider, BLITZ, BLAST, and CLUSTAL-W. Phylogenetic analyses were performed using the PHYLIP programs webcite. DNAPARS (parsimony) (Fig. 3) and DNAML (maximum likelihood) (data not shown) produced essentially identical trees. These programs were run using the Jumble option to test the trees using 50 different, randomly generated orders of adding the different sequences. In addition, DNAPENNY (parsimony by brand-and-bound algorithm) generated a tree with the same branch orders as DNAPARS and DNAML. RETREE and DRAWGRAM were used to visualize the tree and to prepare the image for publication. Final refinement of the image was performed with Illustrator. Synonymous and nonsynonymous substitution frequencies were calculated according to the methods of Nei and Gojobori [67] as applied by Dr. B. Korber at webcite. Codon frequencies in the M1 coding sequences were determined using the COUNTCODON program maintained at webcite. Values for codon frequencies in mammalian genomes were obtained from the Codon Usage Database maintained at webcite

Protein sequence analyses were performed using the GCG programs in SeqWeb version 2 (Accelrys). Multiple sequence alignments were done with PRETTY. Determinations of molecular weights, isoelectric points, and residue counts were done with PEPTIDESORT. Determinations of percent identities in pairwise comparisons were done with GAP. Plots of sequence identity over running windows of different numbers of amino acids (Fig. 4 and data not shown) were generated with PLOTSIMILARITY, and the image for publication was refined with Illustrator (Adobe Systems). In addition, protein sequences were analysed for conservative and nonconservative substitutions by pairwise CLUSTAL-W analyses, using BLOSUM matrix weighting [68].


Gradient-purified virus and core samples were dissolved in electrophoresis sample buffer (0.24 M Tris [pH 6.8], 1.5% dithiothreitol, 1% SDS), heated to 95°C for 3–5 min, and resolved in a 5–15% SDS-PAGE gradient gel (16.0 × 12.0 × 0.1 cm) [69] at 5 mA for 18 h. Some sets of resolved proteins were fixed, and stained with Coomassie Brilliant Blue R-250 and/or silver [70].


Gradient-purified viral and core proteins were resolved by SDS-PAGE as described above, and sets of resolved proteins were transferred to nitrocellulose membranes with a Semi-Dry Transblot manifold (Bio-Rad Laboratories) according to the manufacturer's instructions. Transfer of all proteins was confirmed by Ponceau S staining. Nonspecific binding was blocked in TBS-T (10 mM Tris [pH 7.5], 100 mM NaCl, 0.1% Tween 20) supplemented with 5% milk proteins, and the membranes probed with polyvalent anti-μ2 antibody (a kind gift from Dr. E. G. Brown, University of Ottawa). Membranes were washed with TBS-T, reacted with horseradish peroxidase-conjugated goat anti-rabbit IgG (Jackson ImmunoResearch Laboratories), and immune complexes detected with the enhanced chemiluminescence system (Amersham Life Sciences) according to the manufacturer's instructions.

Infections and IF microscopy

CV-1 cells were maintained in Dulbecco's modified Eagles medium (Invitrogen) containing 10% fetal bovine serum (HyClone Laboratories) and 10 μg/ml Gentamycin solution (Invitrogen). Rabbit polyclonal IgG against μNS [71] was purified with protein A and conjugated to Alexa Fluor 488 or Alexa Fluor 594 using a kit obtained from Molecular Probes and titrated to optimize the signal-to-noise ratio. Cells were seeded the day before infection at a density of 1.5 × 104/cm2 in 6-well plates (9.6 cm2/well) containing round glass cover slips (18 mm). Cells on cover slips were inoculated with 5 PFU/cell in phosphate-buffered saline (PBS) (137 mM NaCl, 3 mM KCl, 8 mM Na2HPO4 [pH 7.5]) containing 2 mM MgCl2. Virus was adsorbed for 1 h at room temperature before fresh medium was added. Cells were further incubated for 18–24 h at 37°C before fixation for 10 min at room temperature in 2% paraformaldehyde in PBS or 3 min at -20°C in ice-cold methanol. Fixed cells were washed with PBS three times and permeabilized and blocked in PBS containing 1% bovine serum albumin and 0.1% Triton X-100. Antibody was diluted in the blocking solution and incubated with cells for 25–40 min at room temperature. After three washes in PBS, cover slips were mounted on glass slides with Prolong (Molecular Probes). Samples were examined using a Nikon TE-300 inverted microscope equipped with phase and fluorescence optics, and images were collected digitally as described elsewhere [23]. All images were processed and prepared for presentation using Photoshop (Adobe Systems).

Authors' Contributions

PY and NDK participated equally in designing primers and determining the T2J M1 sequence; TJB, MMA, and JSLP determined the M1 sequences of the T3C12 clone and other labs' T3D clones, as well as factory morphologies of all clones; and all authors participated in writing the manuscript. MLN and KMC are the principal investigators and KMC determined the M1 sequences of the other field isolates and ts mutants.


We thank T. S. Dermody for suggesting and providing virus isolates used in this work, J. N. Simonsen for helpful comments, and members of their laboratories for critical reviews of the manuscript. We also thank S. Taylor of the Canadian Science Centre for Human and Animal Health Core DNA Sequencing Facility, the University of Calgary Core DNA Sequencing Facility, and the University of Manitoba Department of Medical Microbiology Core DNA Sequencing Facility.

This research was supported by grants MT-11630 and GSP-48371 from the Canadian Institutes of Health Research (to K. M. C.), NIH grant R01 AI-47904 (to M. L. N.), a junior faculty research grant from the Giovanni Armenise-Harvard Foundation (to M. L. N.), and NIH grant K08 AI52209 (to J. S. L. P.). N. D. K. was the recipient of a Natural Sciences and Engineering Research Council Post-Graduate Scholarship from the Government of Canada and T. J. B. received additional support from NIH grant T32 AI07061 to the Infectious Disease Training Program at Harvard Medical School.


  1. Murray CJL, Lopez AD: In The Global Burden of Disease. A comprehensive assessment of mortality and disability from diseases, injuries, and risk factors in 1990 and projected to 2020. Boston: Harvard School of Public Health; 1996:990. OpenURL

  2. The World Health Report: Fighting Disease, Fostering Development. Geneva: World Health Organization; 1996. OpenURL

  3. Hansen AK, Thomsen P, Jensen HJ: A serological indication of the existence of a guineapig poliovirus.

    Lab Anim 1997, 31:212-218. PubMed Abstract OpenURL

  4. Lesburg CA, Cable MB, Ferrari E, Hong Z, Mannarino AF, Weber PC: Crystal structure of the RNA-dependent RNA polymerase from hepatitis C virus reveals a fully encircled active site.

    Nat Struct Biol 1999, 6:937-943. PubMed Abstract | Publisher Full Text OpenURL

  5. Ng KKS, Cherney MM, Vazquez AL, Machin A, Alonso JMM, Parra F, et al.: Crystal Structures of Active and Inactive Conformations of a Caliciviral RNA-dependent RNA Polymerase.

    Journal of Biological Chemistry 2002, 277:1381-1387. PubMed Abstract | Publisher Full Text OpenURL

  6. Tao Y, Farsetta DL, Nibert ML, Harrison SC: RNA Synthesis in a Cage-Structural Studies of Reovirus Polymerase lambda3.

    Cell 2002, 111:733-745. PubMed Abstract | Publisher Full Text OpenURL

  7. Estes MK: Rotaviruses and their replication. In In Fields Virology. Edited by Knipe DM, Howley PM. Philadelphia: Lippencott Williams & Wilkins; 2001:1747-1785. OpenURL

  8. Nibert ML, Schiff LA: Reoviruses and their replication. In In Fields Virology. Edited by Knipe DM, Howley PM. Philadelphia: Lippencott Williams & Wilkins; 2001:1679-1728. OpenURL

  9. Roy P: Orbiviruses. In In Fields Virology. Edited by Knipe DM, Howley PM. Philadelphia: Lippencott Williams & Wilkins; 2001:1835-1869. OpenURL

  10. Wiener JR, Joklik WK: The sequences of the reovirus serotype 1, 2, and 3 L1 genome segments and analysis of the mode of divergence of the reovirus serotypes.

    Virology 1989, 169:194-203. PubMed Abstract | Publisher Full Text OpenURL

  11. Breun LA, Broering TJ, McCutcheon AM, Harrison SJ, Luongo CL, Nibert ML: Mammalian reovirus L2 gene and lambda2 core spike protein sequences and whole-genome comparisons of reoviruses type 1 Lang, type 2 Jones, and type 3 Dearing.

    Virology 2001, 287:333-348. PubMed Abstract | Publisher Full Text OpenURL

  12. Drayna D, Fields BN: Activation and characterization of the reovirus transcriptase: genetic analysis.

    J Virol 1982, 41:110-118. PubMed Abstract | PubMed Central Full Text OpenURL

  13. Morozov SY: A possible relationship of reovirus putative RNA polymerase to polymerases of positive-strand RNA viruses.

    Nucleic Acids Res 1989, 17:5394. PubMed Abstract | PubMed Central Full Text OpenURL

  14. Starnes MC, Joklik WK: Reovirus protein lambda 3 is a poly(C)-dependent poly(G) polymerase.

    Virology 1993, 193:356-366. PubMed Abstract | Publisher Full Text OpenURL

  15. Coombs KM: Stoichiometry of reovirus structural proteins in virus, ISVP, and core particles.

    Virology 1998, 243:218-228. PubMed Abstract | Publisher Full Text OpenURL

  16. Dryden KA, Farsetta DL, Wang G, Keegan JM, Fields BN, Baker TS, et al.: Internal/Structures Containing Transcriptase-Related Proteins in Top Component Particles of Mammalian Orthoreovirus*1.

    Virology 1998, 245:33-46. PubMed Abstract | Publisher Full Text OpenURL

  17. Zhang X, Walker SB, Chipman PR, Nibert ML, Baker TS: Reovirus polymerase lambda 3 localized by cryo-electron microscopy of virions at a resolution of 7.6 angstrom.

    Nature Structural Biology 2003, 10:1011-1018. PubMed Abstract | Publisher Full Text OpenURL

  18. Kim J, Parker JSL, Murray KE, Nibert ML: Nucleoside and RNA Triphosphatase Activities of Orthoreovirus Transcriptase Cofactor {micro}2.

    Journal of Biological Chemistry 2004, 279:4394-4403. PubMed Abstract | Publisher Full Text OpenURL

  19. Yin P, Cheang M, Coombs KM: The M1 gene is associated with differences in the temperature optimum of the transcriptase activity in reovirus core particles.

    J Virol 1996, 70:1223-1227. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  20. Noble S, Nibert ML: Core protein mu2 is a second determinant of nucleoside triphosphatase activities by reovirus cores.

    J Virol 1997, 71:7728-7735. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  21. Brentano L, Noah DL, Brown EG, Sherry B: The reovirus protein mu2, encoded by the M1 gene, is an RNA-binding protein.

    J Virol 1998, 72:8354-8357. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  22. Mbisa JL, Becker MM, Zou S, Dermody TS, Brown EG: Reovirus mu2 protein determines strain-specific differences in the rate of viral inclusion formation in L929 cells.

    Virology 2000, 272:16-26. PubMed Abstract | Publisher Full Text OpenURL

  23. Parker JSL, Broering TJ, Kim J, Higgins DE, Nibert ML: Reovirus core protein mu 2 determines the filamentous morphology of viral inclusion bodies by interacting with and stabilizing microtubules.

    Journal of Virology 2002, 76:4483-4496. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  24. Moody MD, Joklik WK: The function of reovirus proteins during the reovirus multiplication cycle: analysis using monoreassortants.

    Virology 1989, 173:437-446. PubMed Abstract | Publisher Full Text OpenURL

  25. Sherry B, Fields BN: The reovirus M1 gene, encoding a viral core protein, is associated with the myocarditic phenotype of a reovirus variant.

    J Virol 1989, 63:4850-4856. PubMed Abstract | PubMed Central Full Text OpenURL

  26. Matoba Y, Sherry B, Fields BN, Smith TW: Identification of the viral genes responsible for growth of strains of reovirus in cultured mouse heart cells.

    J Clin Invest 1991, 87:1628-1633. PubMed Abstract | PubMed Central Full Text OpenURL

  27. Matoba Y, Colucci WS, Fields BN, Smith TW: The reovirus M1 gene determines the relative capacity of growth of reovirus in cultured bovine aortic endothelial cells.

    J Clin Invest 1993, 92:2883-2888. PubMed Abstract | PubMed Central Full Text OpenURL

  28. Haller BL, Barkon ML, Vogler GP, Virgin HW: Genetic mapping of reovirus virulence and organ tropism in severe combined immunodeficient mice: organ-specific virulence genes.

    J Virol 1995, 69:357-364. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  29. Sherry B, Torres J, Blum MA: Reovirus induction of and sensitivity to beta interferon in cardiac myocyte cultures correlate with induction of myocarditis and are determined by viral core proteins.

    J Virol 1998, 72:1314-1323. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  30. Wiener JR, Bartlett JA, Joklik WK: The sequences of reovirus serotype 3 genome segments M1 and M3 encoding the minor protein mu 2 and the major nonstructural protein mu NS, respectively.

    Virology 1989, 169:293-304. PubMed Abstract | Publisher Full Text OpenURL

  31. Zou S, Brown EG: Nucleotide sequence comparison of the M1 genome segment of reovirus type 1 Lang and type 3 Dearing.

    Virus Res 1992, 22:159-164. PubMed Abstract | Publisher Full Text OpenURL

  32. Harrison SJ, Farsetta DL, Kim J, Noble S, Broering TJ, Nibert ML: Mammalian reovirus L3 gene sequences and evidence for a distinct amino-terminal region of the lambda1 protein.

    Virology 1999, 258:54-64. PubMed Abstract | Publisher Full Text OpenURL

  33. Hrdy DB, Rosen L, Fields BN: Polymorphism of the migration of double-stranded RNA genome segments of reovirus isolates from humans, cattle, and mice.

    J Virol 1979, 31:104-111. PubMed Abstract | PubMed Central Full Text OpenURL

  34. Goral MI, Mochow-Grundy M, Dermody TS: Sequence diversity within the reovirus S3 gene: reoviruses evolve independently of host species, geographic locale, and date of isolation.

    Virology 1996, 216:265-271. PubMed Abstract | Publisher Full Text OpenURL

  35. Duncan R, Horne D, Cashdollar LW, Joklik WK, Lee PW: Identification of conserved domains in the cell attachment proteins of the three serotypes of reovirus.

    Virology 1990, 174:399-409. PubMed Abstract | Publisher Full Text OpenURL

  36. Nibert ML, Dermody TS, Fields BN: Structure of the reovirus cell-attachment protein: a model for the domain organization of sigma 1.

    J Virol 1990, 64:2976-2989. PubMed Abstract | PubMed Central Full Text OpenURL

  37. Dermody TS, Nibert ML, Bassel-Duby R, Fields BN: Sequence diversity in S1 genes and S1 translation products of 11 serotype 3 reovirus strains.

    J Virol 1990, 64:4842-4850. PubMed Abstract | PubMed Central Full Text OpenURL

  38. Chappell JD, Goral MI, Rodgers SE, dePamphilis CW, Dermody TS: Sequence diversity within the reovirus S2 gene: reovirus genes reassort in nature, and their termini are predicted to form a panhandle motif.

    J Virol 1994, 68:750-756. PubMed Abstract | PubMed Central Full Text OpenURL

  39. Kedl R, Schmechel S, Schiff L: Comparative sequence analysis of the reovirus S4 genes from 13 serotype 1 and serotype 3 field isolates.

    J Virol 1995, 69:552-559. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  40. Coombs KM: Identification and characterization of a double-stranded RNA-reovirus temperature-sensitive mutant defective in minor core protein mu2.

    J Virol 1996, 70:4237-4245. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  41. Martin AC, Orengo CA, Hutchinson EG, Jones S, Karmirantzou M, Laskowski RA, et al.: Protein folds and functions.

    Structure 1998, 6:875-884. PubMed Abstract | Publisher Full Text OpenURL

  42. Gutman PD, Fuchs P, Ouyang L, Minton KW: Identification, sequencing, and targetted mutagenesis of a DNA polymerase gene required for the extreme radioresistance of Deinococcus radiodurans.

    J Bacteriol 1993, 175:3581-3590. PubMed Abstract | PubMed Central Full Text OpenURL

  43. Okamura H, Resh MD: Differential binding of pp60c-src and pp60v-src to cytoskeleton is mediated by SH2 and catalytic domains.

    Oncogene 1994, 9:2293-2303. PubMed Abstract OpenURL

  44. Zou S, Brown EG: Stable expression of the reovirus mu2 protein in mouse L cells complements the growth of a reovirus ts mutant with a defect in its M1 gene.

    Virology 1996, 217:42-48. PubMed Abstract | Publisher Full Text OpenURL

  45. Fields BN, Joklik WK: Isolation and preliminary genetic and biochemical characterization of temperature-sensitive mutants of reovirus.

    Virology 1969, 37:335-342. PubMed Abstract | Publisher Full Text OpenURL

  46. Mora M, Partin K, Bhatia M, Partin J, Carter C: Association of reovirus proteins with the structural matrix of infected cells.

    Virology 1987, 159:265-277. PubMed Abstract | Publisher Full Text OpenURL

  47. Fields BN: Temperature-sensitive mutants of reovirus type 3: Features of genetic recombination.

    Virology 1971, 46:142-148. PubMed Abstract | Publisher Full Text OpenURL

  48. Ramig RF, Mustoe TA, Sharpe AH, Fields BN: A genetic map of reovirus. II. Assignment of the double-stranded RNA-negative mutant groups C, D, and E to genome segments.

    Virology 1978, 85:531-534. PubMed Abstract | Publisher Full Text OpenURL

  49. Ito Y, Joklik WK: Temperature-sensitive mutants of reovirus. I. Patterns of gene expression by mutants of groups C, D, and E.

    Virology 1972, 50:189-201. PubMed Abstract | Publisher Full Text OpenURL

  50. Schuerch AR, Joklik WK: Temperature-sensitive mutants of reovirus. IV. Evidence that anomalous electrophoretic migration behavior of certain double-stranded RNA hybrid species is mutant group-specific.

    Virology 1973, 56:218-229. PubMed Abstract | Publisher Full Text OpenURL

  51. Dales S: Association between the spindle apparatus and reovirus.

    Proc Natl Acad Sci U S A 1963, 50:268-275. PubMed Abstract | PubMed Central Full Text OpenURL

  52. Spendlove RS, Lennette EH, John AC: The role of the mitotic apparatus in the intracellular location of reovirus antigen.

    J Immunol 1963, 90:554-560. PubMed Abstract OpenURL

  53. Sabin AB: Reoviruses.

    Science 1959, 130:1387-1389. PubMed Abstract OpenURL

  54. Raine CS, Fields BN: Reovirus type 3 encephalitis – a virologic and ultrastructural study.

    J Neuropathol Exp Neurol 1973, 32:19-33. PubMed Abstract OpenURL

  55. Babiss LE, Luftig RB, Weatherbee JA, Weihing RR, Ray UR, Fields BN: Reovirus serotypes 1 and 3 differ in their in vitro association with microtubules.

    J Virol 1979, 30:863-874. PubMed Abstract | PubMed Central Full Text OpenURL

  56. Weiner HL, Powers ML, Fields BN: Absolute linkage of virulence and central nervous system cell tropism of reoviruses to viral hemagglutinin.

    J Infect Dis 1980, 141:609-616. PubMed Abstract OpenURL

  57. Jenkins GM, Holmes EC: The extent of codon usage bias in human RNA viruses and its evolutionary origin.

    Virus Res 2003, 92:1-7. PubMed Abstract | Publisher Full Text OpenURL

  58. Mendez II, Hermann LL, Hazelton PR, Coombs KM: A comparative analysis of freon substitutes in the purification of reovirus and calicivirus.

    J Virol Methods 2000, 90:59-67. PubMed Abstract | Publisher Full Text OpenURL

  59. Sambrook J, Fritsch EF, Maniatis T: Molecular cloning: a laboratory manual. 2nd edition. Cold Spring Harbor: Cold Spring Harbor Laboratory; 1989. OpenURL

  60. Nibert ML, Margraf RL, Coombs KM: Nonrandom segregation of parental alleles in reovirus reassortants.

    J Virol 1996, 70:7295-7300. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  61. Saiki RK, Scharf S, Faloona F, Mullis KB, Horn GT, Erlich HA, et al.: Enzymatic amplification of α-globin genomic sequences and restriction site analysis for diagnosis of sickle cell anemia.

    Science 1985, 230:1350-1354. PubMed Abstract OpenURL

  62. Sanger F, Nicklen S, Coulson AR: DNA sequencing with chain-terminating inhibitors.

    Proc Natl Acad Sci U S A 1977, 74:5463-5467. PubMed Abstract | PubMed Central Full Text OpenURL

  63. Murray V: Improved double-stranded DNA sequencing using the linear polymerase chain reaction.

    Nucleic Acids Res 1989, 17:8889. PubMed Abstract | PubMed Central Full Text OpenURL

  64. Craxton M: Linear amplification sequencing, a powerful method for sequencing DNA.

    Methods: Compan Meth Enzymol 1991, 3:20-26. OpenURL

  65. Frohman MA, Dush MK, Martin GR: Rapid production of full-length cDNAs from rare transcripts: Amplification using a single gene-specific oligonucleotide primer.

    Proc Natl Acad Sci U S A 1988, 85:8998-9002. PubMed Abstract | PubMed Central Full Text OpenURL

  66. Lambden PR, Cooke SJ, Caul EO, Clarke IN: Cloning of noncultivable human rotavirus by single primer amplification.

    J Virol 1992, 66:1817-1822. PubMed Abstract | PubMed Central Full Text OpenURL

  67. Nei M, Gojobori T: Simple methods for estimating the numbers of synonomous and nonsynonomous nucleotide substitutions.

    Mol Biol Evol 1986, 3:418-426. PubMed Abstract | Publisher Full Text OpenURL

  68. Thompson JD, Higgins DG, Gibson TJ: CLUSTAL W: Improving the sensitivity of progressive multiple sequence alignment through sequence weighting, position-specific gap penalties and weight matrix choice.

    Nucleic Acids Res 1994, 22:4673-4680. PubMed Abstract | PubMed Central Full Text OpenURL

  69. Laemmli UK: Cleavage of structural proteins during the assembly of the head of bacteriophage T4.

    Nature 1970, 227:680-685. PubMed Abstract OpenURL

  70. Merril CR, Goldman D, Sedman SA, Ebert MH: Ultrasensitive stain for protein in polyacrylamide gels shows regional variation in cerebrospinal fluid proteins.

    Science 1981, 211:1437-1438. PubMed Abstract OpenURL

  71. Broering TJ, Parker JS, Joyce PL, Kim J, Nibert ML: Mammalian reovirus nonstructural protein μNS forms large inclusions and colocalizes with reovirus microtubule-associated protein μ2 in transfected cells.

    J Virol 2002, 76:8285-8297. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  72. Kyte J, Doolittle RF: A simple method for displaying the hydropathic character of a protein.

    J Mol Biol 1982, 157:105-132. PubMed Abstract OpenURL

  73. Emini EA, Hughs JV, Perlow DS, Boger J: Induction of hepatitis A virus-neutralizing antibody by a virus-specific synthetic peptide.

    J Virol 1985, 55:836-9. PubMed Abstract | PubMed Central Full Text OpenURL

  74. Rost B: Predicting one-dimensional protein structure by use of sequence profiles and neural networks.

    Methods Enzymol 1996, 266:525-539. PubMed Abstract | Publisher Full Text OpenURL